search

Delta Tau TURBO UMAC CPU Manual de usuario Pagina 19

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 49
  • Tabla de contenidos
  • MARCADORES
    • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 18
UMAC Turbo CPU/Communications Board Hardware Manual
Board Jumpers 13
E6: USB/Ethernet Micro-Controller Reset Enable
E Point and
Physical Layout
Description
Default
Remove jumper to reset USB/Ethernet Micro-Controller on power-
up\reset – replace after power-on.
Install jumper for normal operations.
Pins 1-2 jumpered
E7 – E10: IRQ PC Interrupt Select
E Point and
Physical Layout
Description
Default
E7:
Jump E7 pin 1 to 2 to permit UMAC to interrupt PC on PC/104 bus
interrupt line IRQ10.
Remove E7 jumper to inhibit interrupt capability on this line.
No jumper installed
E8:
Jump E8 pin 1 to 2 to permit UMAC to interrupt PC on PC/104 bus
interrupt line IRQ11.
Remove E8 jumper to inhibit interrupt capability on this line.
No jumper installed
E9:
Jump E9 pin 1 to 2 to permit UMAC to interrupt PC on PC/104 bus
interrupt line IRQ12.
Remove E9 jumper to inhibit interrupt capability on this line.
No jumper installed
E10:
Jump E10 pin 1 to 2 to permit UMAC to interrupt PC on PC/104
bus interrupt line IRQ15.
Remove E10 jumper to inhibit interrupt capability on this line.
No jumper installed
E12: Digital/Analog Reference Connect
E Point and
Physical Layout
Description
Default
Jump pin 1 to 2 to tie digital GND reference to analog AGND
reference when using joint supply (e.g. from TB1 or PC/104).
Remove jumper to maintain separate GND and AGND reference
voltages to keep isolation when using separate supplies.
No jumper installed
E17 – E18: Serial Port Servo and Phase Clocks Enable
E Point and
Physical Layout
Description
Default
E17A:
Jump E17A pin 1 to 2 to disable PHASE+ on J7 serial port.
Jump E17A pin 2 to 3 to enable PHASE+ on J7 serial port.
Pins 1-2 jumpered
E17B:
Jump E17B pin 1 to 2 to disable PHASE- on J7 serial port.
Jump E17B pin 2 to 3 to enable PHASE- on J7 serial port.
Pins 1-2 jumpered
E18A:
Jump E18A pin 1 to 2 to disable SERVO+ on J7 serial port.
Jump E18A pin 2 to 3 to enable SERVO+ on J7 serial port.
Pins 1-2 jumpered
E18B:
Jump E18B pin 1 to 2 to disable SERVO- on J7 serial port.
Jump E18B pin 2 to 3 to enable SERVO- on J7 serial port.
Pins 1-2 jumpered
Vista de pagina 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 48 49

Comentarios a estos manuales

Sin comentarios
Relacionado con productos y manuales para No Delta Tau TURBO UMAC CPU
No Delta Tau 5xx-603869-xUxx Especificaciones   (50 paginas)
No Delta Tau PMAC Manual de usuario   (22 paginas)
  • Aeroqual Traxdata Peak Aluminum Railing DreamLink Lennox International Inc.
  • Neff Campanas De Cocina Nikon Multifuncionales Comcast Controles remotos Tripp Lite Cargador de dispositivos móviles Fisher-Price Vehiculo todoterreno
  • Acer CB315-1H ViewSonic VG930m-3 Olympus C-3000 Zoom Sony KLV-V40A10E Samsung T22A350
  • DeWalt D26451 Manual de uso y cuidado Philips SP9820/12 Manual de usuario Krk V-88 Manual de usuario SAGEMCOM D790 Manual de usuario HP COMPAQ 6715s Manual de usuario