Delta Tau ADVANTAGE 900 BASIC PACKAGE Manual de usuario descargar pdf (Pagina 22)

Universal Serial Operator Control Logic Board

18 SOCLB Software Setup

Step 3

Make sure the In PC Bus button is selected (as shown above). PMAC NC 32 for Windows supports only

the In PC Bus option. Click on the OK button and the below displayed dialog box appears.

The PMAC board is recognized on the PC bus and can communicate with the PMAC now. To start

communicating with the PMAC board, start the Pewin32 program. Click on Pewin32 from the Windows

Start Programs/Delta Tau/Pewin 32 icon. A display closely resembling the one shown below appears.

Important items to note about the Pewin 32 Terminal window start in the title bar portion of the Pewin 32

Terminal. Starting from left to right, the information in the above displayed title bar tells us:

1. We are talking to PMAC: 0 (Device 0).

2. The current firmware revision is 1.937T6 (the T stands for test, not for general release).

3. The current firmware revision date is 10/02/2000.

4. We are talking to a Turbo PMAC.

Configuration Files for the Advantage 810

The following is an example of downloading the basic setup files for an Advantage 810 CNC being

interfaced with a milling machine. For basic milling machine operation, the following files must be

downloaded to the PMAC board:

ADV810.H

ADV810M.PLC

ADDRESS.H

OEM.H

OVRD.PLC

SPINDLE.PLC

RESET.PLC

MILL.G

MILL.M

MILL.T

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 31 32

Sin comentarios

Delta Tau ADVANTAGE 900 BASIC PACKAGE Manual de usuario Pagina 22