Delta Tau ADVANTAGE 900 BASIC PACKAGE Manual de usuario descargar pdf (Pagina 24)

Universal Serial Operator Control Logic Board

20 SOCLB Software Setup

Downloading the Configuration File

Once all the PLC and PMC (G, M and T code files) programs that are required for the application have

been included in the configuration file, download these files to the PMAC board. To download the

configuration file:

1. Start the Pewin32 program.

2. Go to the menu bar and select File, Download File. A Download File dialog box will appear.

3. Select the Adv810.cfg (or appropriate configuration file) from the sub-directory that contains the

configuration file.

4. Click the Open button.

A Download Options dialog box appears as shown below.

Make sure the File Contains Macros or Compiled PLCs (PLCCs) checkbox is checked as shown

above. It is useful to have the Create Log File and Create Map File checkboxes checked as well. These

options create .LOG and .MAP files after the download is completed.

File Name File Type File Purpose

ADV810.CFG Configuration File Master download file for Advantage 810.

ADV810.H Header File M-variable assignments to support standard SOCLB operation.

ADV810M.PLC or

ADV810L.PLC

PMAC PLC File, PLC #1 Logic for either mill or lathe operator control panel.

ADV810User.H Header File M-variable assignments for customer assignable User 1 through

User 8 pushbuttons and LEDs.

ADDRESS.H Header File M-variable assignments for standard PMAC NC 32 PLC programs

OEM.H Header File M, P, and Q variable assignments for standard PMAC NC 32 PLC

programs.

HANDLE.PLC PMAC PLC File, PLC #4 Interface logic for Manual Pulse Generator controlled through I/O.

OVRD.PLC PMAC PLC File, PLC #2 Control logic for PMAC NC 32 changing time bases without user

intervention.

MILL.G or LATHE.G PMAC Motion Program,

PMC #1000

Operational logic to interpret G code commands to PMAC

commands.

MILL.M or LATHE.M PMAC Motion Program,

PMC #1001

Control logic to interpret M code commands to PMAC commands.

MILL.T or LATHE.T PMAC Motion Program,

PMC #1002

Interpreter file for T codes.

SPINDLE.PLC PMAC PLC File, PLC #5 Control logic for open and closed loop spindle systems. Not

required in all applications.

RESET.PLC PMAC PLC File, PLC

#13

Provides orderly reset sequence between PMAC and host PC

IO810.H Header File M-variable assignments and I/O declaration file for UMAC

controlled I/O.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30 31 32

Comentarios a estos manuales

Sin comentarios

Delta Tau ADVANTAGE 900 BASIC PACKAGE Manual de usuario Pagina 24

Comentarios a estos manuales