Delta Tau PMAC2A-PC/104 Manual de usuario descargar pdf (Pagina 43)

Hardware Reference Manual

E-Point Jumper Descriptions 39

E-POINT JUMPER DESCRIPTIONS

E0: Reserved for Future Use

E Point and

Physical Layout

Location Description Default

E0

C6 For future use. No jumper

E1 - E2: Machine Output Supply Voltage Configure

E Point and

Physical Layout

Location Description Default

E1

B2 Jump pin 1 to 2 to apply +V (+5V to 24V) to

pin 10 of U7 (should be ULN2803A for sink

output configuration) JOPTO Machine

outputs M01-M08.

Jump pin 2 to 3 to apply GND to pin 10 of

U7 (should be UDN2981A for source output

configuration).

Warning:

The jumper setting must match the type of

driver IC, or damage to the IC will result.

1-2 Jumper installed

E2

B2 Jump pin 1 to 2 to apply GND to pin 11 of

U7 (should be ULN2803A for sink output

configuration).

Jump pin 2 to 3 to apply +V (+5V to 24V) to

pin 10 of U7 (should be UDN2981A for

source output configuration).

Warning:

The jumper setting must match the type of

driver IC, or damage to the IC will result.

1-2 Jumper installed

E3 – E4: JHW, PD Function Select

E Point and

Physical Layout

Location Description Default

E3

E4 Jump pin 1 to 2 to enable handwheel channel

1 inputs.

Jump pin 2 to 3 to enable pulse and direction

channel 1 outputs.

1-2 Jumper installed

E4

E4 Jump pin 1 to 2 to enable handwheel channel

2 inputs.

Jump pin 2 to 3 to enable pulse and direction

channel 2 outputs.

1-2 Jumper installed

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 54 55

Comentarios a estos manuales

Sin comentarios