Delta Tau PMAC2A-PC/104 Manual de usuario descargar pdf (Pagina 44)

Hardware Reference Manual

E-Point Jumper Descriptions

E5: Servo Gate Address Select

E Point and

Physical Layout

Location Description Default

E5 Jump pin 1 to 2 to address Acc-1P channels at the

regular addresses for channels 5 to 8.

Jump pin 2 to 3 to address Acc-1P channels at the

regular addresses for channels 5 to 8 plus $40.

1-2 Jumper installed

E6: I/O Gate Address Select

E Point and

Physical Layout

Location Description Default

E5 Jump pin 1 to 2 to address Acc-1P I/O ports at

the regular addresses.

Jump pin 2 to 3 to address Acc-1P I/O ports at

the regular addresses plus $40.

1-2 Jumper installed

E7: Machine Input Source/Sink Control

E Point and

Physical Layout

Location Description Default

E5 Jump pin 1 to 2 to apply +5V to input reference

resistor sip pack; this will bias MI1 to MI8 inputs

to +5V for OFF state; input must then be

grounded for ON state.

Jump pin 2 to 3 to apply GND to input reference

resistor sip pack; this will bias MI1 to MI8 inputs

to GND for OFF state; input must then be pulled

up for ON state (+5V to +24V).

1-2 Jumper installed

E16: ADC Inputs Enable

E Point and

Physical Layout

Location Description Default

E16

D1 Jump pin 1 to 2 to enable the Option-12 ADC

inputs.

Remove jumper to disable the ADC inputs,

which might be necessary for reading current

feedback signals from digital amplifiers.

No jumper

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 54 55

Comentarios a estos manuales

Sin comentarios

Delta Tau PMAC2A-PC/104 Manual de usuario Pagina 44

Comentarios a estos manuales

Relacionado con productos y manuales para Digital + i / s analógicas módulos Delta Tau PMAC2A-PC/104