Delta Tau ADVANTAGE 900 BASIC PACKAGE Manual de usuario descargar pdf (Pagina 8)

Advantage 900 Remote Operator Pendant

INTRODUCTION

Communication Interface

The Advantage 900 Remote Operator Pendant communicates to the PMAC/UMAC through the

Pcommserver device driver. The Pcommserver device driver is initialized when any Delta Tau

Pro2 based software is started. During the initialization sequence the device driver will

automatically detect when the Advantage 900 Remote Operator Pendant is present and begin

transferring data to the PMAC/UMAC via Dual Ported Ram memory addresses (see the Software

Setup section of this manual for more information).

The Advantage 900 Remote Operator Pendant connects directly to a PC via either a USB2.0 port

or RS232 Serial Port (when using the wireless option). The Pcommserver transfers the

information to the PMAC via the device driver. The Advantage 900 Remote Operator Pendant

does not connect directly to the PMAC.

When the optional wireless version is used, the connection to the PC is via the RS232 port located

on the Advantage 900 Relay Board, not directly from the handheld unit.

Specifications

Advantage 900 Remote Operator Pendant

Model

USB2.0 Cabled Pendant

(P/N: A90x-xxxxx-Sx)

Wireless Bluetooth Pendant

(P/N: A90x-xxxxx-Wx)

Power

Requirements

+5VDC, 500mA

(Through USB2.0 Cable)

+5VDC, 1.5A

(Through Charge Cable)

Battery N/A Lithium Ion, +3.7VDC

Advantage 900 Relay Board

Power

Requirements

+5VDC, +12VDC

(Through Small Disk Drive

Connector)

+5VDC, +12VDC

(Through Small Disk Drive

Connector)

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 39 40

Sin comentarios

Delta Tau ADVANTAGE 900 BASIC PACKAGE Manual de usuario Pagina 8