search

Delta Tau PMAC2A-PC/104 Manual Pagina 49

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 72
  • Tabla de contenidos
  • MARCADORES
    • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 48
PMAC2A-PC104 Hardware Manual
Base Board E-Point Jumper Descriptions 43
E13: Power-Up/Reset Load Source
E Point and Physical
Layout
Location Description Default
E13
E5
Jump pin 1 to 2 to reload firmware
through serial or bus port.
Remove jumper for normal operation.
No jumper
E14: Watchdog Disable Jumper
E Point and Physical
Layout
Location Description Default
E14
B3
Jump pin 1 to 2 to disable Watchdog
timer (for test purposes only).
Remove jumper to enable Watchdog
timer.
No jumper
E15A, B, C: Flash Memory Bank Select
E Point and Physical
Layout
Location Description Default
E15A
E15C
E4
Remove all 3 jumpers to select flash
memory bank with factory-installed
firmware.
Use other configuration to select one of
the 7 other flash memory banks.
No jumpers
installed
E16: ADC Inputs Enable
E Point and Physical
Layout
Location Description Default
E16
D1
Jump pin 1 to 2 to enable the Option-12
ADC inputs.
Remove jumper to disable the ADC
inputs, which might be necessary for
reading current feedback signals from
digital amplifiers.
No jumper
Vista de pagina 48
1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 71 72

Comentarios a estos manuales

Sin comentarios
  • Cisco Systems Cumberland Universal Tubs ELEKTRA New Holland
  • Smeg No AudioQuest Cables Usb Ricoh Software GE Hornos Apple Ampliaciones De Potencia
  • Samsung SM-T535 Omron NE-C801 Citizen SDC-414II Philips SHQ6500CL/00
  • Pioneer VSX-420-K Manual de usuario Axis A1001 Guía de instalación Dell U2412M Monitor Manual de usuario Commercial cool CPN10XHJ Manual de usuario Philips AJ4000B/12 Manual de usuario