Delta Tau PMAC2A-PC/104 Manual Pagina 55

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 72
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 54
PMAC2A-PC104 Hardware Manual
ACC-2P E-Point Jumper Descriptions 49
ACC-2P E-POINT JUMPER DESCRIPTIONS
E3 – E4: JHW, PD Function Select
E Point and Physical
Layout
Location Description Default
E3
F4
Jump pin 1 to 2 to enable handwheel
channel 1 inputs.
Jump pin 2 to 3 to enable pulse and
direction channel 1outputs.
1-2 Jumper
installed
E4
F3
Jump pin 1 to 2 to enable handwheel
channel 2 inputs.
Jump pin 2 to 3 to enable pulse and
direction channel 2 outputs.
1-2 Jumper
installed
E5: I/O Gate Address Select
E Point and Physical
Layout
Location Description Default
E5
F1
Jump pin 1 to 2 to address ACC-2P I/O
ports at the regular addresses.
Jump pin 2 to 3 to address ACC-2P I/O
ports at the regular addresses plus $40.
1-2 Jumper
installed
E6: Communications Port Select
E Point and Physical
Layout
Location Description Default
E6
E6
Jump pin 1 to 2 to enable the PC/104
communications port.
Jump pin 2 to 3 to enable either the
USB or Ethernet communications port.
1-2 Jumper
installed
E7- E10: Ports Direction Control
E Point and Physical
Layout
Location Description Default
E7
D1
Install jumper to make DATx lines
inputs.
No jumper to make DATx lines
outputs.
Jumper installed
E8
D1
Install jumper to make SELx lines
inputs.
No jumper to make SELx lines outputs.
No jumper
E9
D2
Install jumper to make MOx lines
inputs.
No jumper to make MOx lines outputs.
No jumper
E10
D2
Install jumper to make MIx lines
inputs.
No jumper to make MIx lines outputs.
Jumper installed
Vista de pagina 54
1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 71 72

Comentarios a estos manuales

Sin comentarios